Depoda Bekletme artık daha iyi daha yeni
✕
✕
✕
0
Depoda Bekletme eşsiz deneyimleriniz için daha iyi daha yeni
✕

15:00'dan önce yapılan alışverişler aynı gün kargo!

-65%

EATON 279394 Şalter Kurma Kolu

Marka: Eaton
Orijinal fiyat: 6.177,00₺.Şu andaki fiyat: 2.161,95₺.
10.000₺ ve üzeri alışverişlerinize özel teklif.
EATON 279394 Şalter Kurma Kolu
EATON 279394 Şalter Kurma Kolu
HIZLI GÖNDERİ
%100 ORJİNAL
İADE DEĞİŞİM
EATON 279394 Şalter Kurma Kolu
Listeme Ekle

EATON 279394 NZM3 – NZM3-XTVD-0 Kompakt Şalter Aksesuarı: Uzatmalı Döner Kurma Kolu (0mm)-Siyah

Datasheet – NZM3-XTVD-0
Part no.NZM3-XTVD-0
Article no.279394
Catalog No.279394
sg05715
Similar to illustration
Delivery program
Product rangeAccessories
AccessoriesDoor coupling rotary handle
Standard/ApprovalUL/CSA, IEC
Construction sizeNZM3
DescriptionDoor coupling rotary handle for operating the switch through a closed control panel door
FunctionStandard, black/grey
Protection classIP66

UL/CSA Type 4X, Type 12

Locking facilitylockable on the 0 position on the handle using up to 3 padlocks

With door interlock

Door interlockNot defeated in the locked OFF and ON positions

Can be modified in the unlocked ON position

Can be modified such that it can be defeated from the outside using a screwdriver

Door can be opened in OFF

Project planning informationComplete including rotary drive and coupling parts

For extremely narrow fittings

With special short extension shaft

Cannot be combined with NZM…-XDZ additional handle

External warning plate/designation label can be clipped on.

For use withNZM3(-4), PN3(-4), N(S)3(-4)
lockablesingle
Notes

Circuit‐breaker can also be installed in a lying position 90 ° left/right, with the handle still in the same position.

Technical data
Design verification as per IEC/EN 61439
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistanceMeets the product standard’s requirements.
10.2.3.1 Verification of thermal stability of enclosuresMeets the product standard’s requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard’s requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effectsMeets the product standard’s requirements.
10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard’s requirements.
10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.
10.2.7 InscriptionsMeets the product standard’s requirements.
10.3 Degree of protection of ASSEMBLIESDoes not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distancesMeets the product standard’s requirements.
10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connectionsIs the panel builder’s responsibility.
10.8 Connections for external conductorsIs the panel builder’s responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strengthIs the panel builder’s responsibility.
10.9.3 Impulse withstand voltageIs the panel builder’s responsibility.
10.9.4 Testing of enclosures made of insulating materialIs the panel builder’s responsibility.
10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit ratingIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibilityIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Handle for power circuit breaker (EC000229)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Handle for switch devices (ecl@ss10.0.1-27-37-04-14 [AKF012014])
LockableYes
ColourBlack
Suitable for emergency stopNo
With extension shaftNo
Suitable for power circuit breakerYes
Suitable for switch disconnectorYes
Approvals
Product StandardsUL489; CSA-C22.2 No. 5-09; IEC60947, CE marking
UL File No.E140305
UL Category Control No.DIHS
CSA File No.022086
CSA Class No.1437-01
North America CertificationUL listed, CSA certified
Degree of ProtectionIEC: IP66, UL/CSA Type 4X, 12
Dimensions
123X368
123X196
123X489
Minimum door coupling rotary handle clearance from door pivot point
Stokta Yok