EATON 50716 3 Kademeli Sıfırlı 1x20A Pako Şalter
Marka: Eaton
Orijinal fiyat: 1.030,07₺.360,52₺Şu andaki fiyat: 360,52₺.
10.000₺ ve üzeri alışverişlerinize özel teklif.
EATON 50716 T0-2-8241/E 1x20A Pako Şalter (3 Kademeli,sıfırlı)
| Datasheet – T0-2-8241/E | |||
| Part no. | T0-2-8241/E | ||
| Article no. | 050716 | ||
| Catalog No. | 050716 | ||
| 1150PIC-420 | |||
| Similar to illustration | |||
| Delivery program | |||
| Product range | Control switches | ||
| Part group reference | T0 | ||
| Basic function | Step switches | ||
| with black thumb grip and front plate | |||
| Contacts | 3 | ||
| Number of steps | 3 steps, 45° | ||
| Degree of Protection | Front IP65 | ||
| Design | flush mounting | ||
| 000Z079 | |||
| Contact sequence | 115S300-2 | ||
| Switching angle | ° | 45 | |
| Switching performance | maintained With 0 (Off) position | ||
| Design number | 8241 | ||
| Front plate no. | 115K017 | ||
| front plate | 0-3 | ||
| Motor rating AC-23A, 50 – 60 Hz | |||
| 400 V | P | kW | 5.5 |
| Rated uninterrupted current | Iu | A | 20 |
| Note on rated uninterrupted current !u | Rated uninterrupted current Iu is specified for max. cross-section. | ||
| Number of contact units | contact unit(s) | 2 | |
| Technical data | |||
| General | |||
| Standards | IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch-disconnector according to IEC/EN 60947-3 | ||
| Climatic proofing | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 | ||
| Ambient temperature | |||
| Open | °C | -25 – +50 | |
| Enclosed | °C | -25 – +40 | |
| Overvoltage category/pollution degree | III/3 | ||
| Rated impulse withstand voltage | Uimp | V AC | 6000 |
| Mechanical shock resistance | g | 15 | |
| Mounting position | As required | ||
| Contacts | |||
| Electrical characteristics | |||
| Rated operational voltage | Ue | V AC | 690 |
| Rated uninterrupted current | Iu | A | 20 |
| Note on rated uninterrupted current !u | Rated uninterrupted current Iu is specified for max. cross-section. | ||
| Load rating with intermittent operation, class 12 | |||
| AB 25 % DF | x Ie | 2 | |
| AB 40 % DF | x Ie | 1.6 | |
| AB 60 % DF | x Ie | 1.3 | |
| Short-circuit rating | |||
| Fuse | A gG/gL | 20 | |
| Rated short-time withstand current (1 s current) | Icw | Arms | 320 |
| Note on rated short-time withstand current lcw | Current for a time of 1 second | ||
| Rated conditional short-circuit current | Iq | kA | 6 |
| Switching capacity | |||
| cos ϕ rated making capacity as per IEC 60947-3 | A | 130 | |
| Rated breaking capacity cos ϕ to IEC 60947-3 | A | ||
| 230 V | A | 100 | |
| 400/415 V | A | 110 | |
| 500 V | A | 80 | |
| 690 V | A | 60 | |
| Safe isolation to EN 61140 | |||
| between the contacts | V AC | 440 | |
| Current heat loss per contact at Ie | W | 0.6 | |
| Current heat loss per auxiliary circuit at Ie (AC-15/230 V) | CO | 0.6 | |
| Lifespan, mechanical | Operations | x 106 | > 0.4 |
| Maximum operating frequency | Operations/h | 1200 | |
| AC | |||
| AC-3 | |||
| Rating, motor load switch | P | kW | |
| 220 V 230 V | P | kW | 3 |
| 230 V Star-delta | P | kW | 5.5 |
| 400 V 415 V | P | kW | 5.5 |
| 400 V Star-delta | P | kW | 7.5 |
| 500 V | P | kW | 5.5 |
| 500 V Star-delta | P | kW | 7.5 |
| 690 V | P | kW | 4 |
| 690 V Star-delta | P | kW | 5.5 |
| Rated operational current motor load switch | |||
| 230 V | Ie | A | 11.5 |
| 230 V star-delta | Ie | A | 20 |
| 400V 415 V | Ie | A | 11.5 |
| 400 V star-delta | Ie | A | 20 |
| 500 V | Ie | A | 9 |
| 500 V star-delta | Ie | A | 15.6 |
| 690 V | Ie | A | 4.9 |
| 690 V star-delta | Ie | A | 8.5 |
| AC-23A | |||
| Motor rating AC-23A, 50 – 60 Hz | P | kW | |
| 230 V | P | kW | 3 |
| 400 V 415 V | P | kW | 5.5 |
| 500 V | P | kW | 7.5 |
| 690 V | P | kW | 5.5 |
| Rated operational current motor load switch | |||
| 230 V | Ie | A | 13.3 |
| 400 V 415 V | Ie | A | 13.3 |
| 500 V | Ie | A | 13.3 |
| 690 V | Ie | A | 7.6 |
| DC | |||
| DC-1, Load-break switches L/R = 1 ms | |||
| Rated operational current | Ie | A | 10 |
| Voltage per contact pair in series | V | 60 | |
| DC-21A | Ie | A | |
| Rated operational current | Ie | A | 1 |
| Contacts | Quantity | 1 | |
| DC-23A, motor load switch L/R = 15 ms | |||
| 24 V | |||
| Rated operational current | Ie | A | 10 |
| Contacts | Quantity | 1 | |
| 48 V | |||
| Rated operational current | Ie | A | 10 |
| Contacts | Quantity | 2 | |
| 60 V | |||
| Rated operational current | Ie | A | 10 |
| Contacts | Quantity | 3 | |
| 120 V | |||
| Rated operational current | Ie | A | 5 |
| Contacts | Quantity | 3 | |
| 240 V | |||
| Rated operational current | Ie | A | 5 |
| Contacts | Quantity | 5 | |
| DC-13, Control switches L/R = 50 ms | |||
| Rated operational current | Ie | A | 10 |
| Voltage per contact pair in series | V | 32 | |
| Control circuit reliability at 24 V DC, 10 mA | Fault probability | HF | -5,< 1 failure in 100,000 switching operations |
| Terminal capacities | |||
| Solid or stranded | mm2 | 1 x (1 – 2,5) 2 x (1 – 2,5) | |
| Flexible with ferrules to DIN 46228 | mm2 | 1 x (0.75 – 2.5) 2 x (0.75 – 2.5) | |
| Terminal screw | M3.5 | ||
| Tightening torque for terminal screw | Nm | 1 | |
| Technical safety parameters: | |||
| Notes | B10d values as per EN ISO 13849-1, table C1 | ||
| Rating data for approved types | |||
| Contacts | |||
| Rated operational voltage | Ue | V AC | 600 |
| Rated uninterrupted current max. | |||
| Main conducting paths | |||
| General use | A | 16 | |
| Auxiliary contacts | |||
| General Use | IU | A | 10 |
| Pilot Duty | A 600 P 300 | ||
| Switching capacity | |||
| Maximum motor rating | |||
| Single-phase | |||
| 120 V AC | HP | 0.5 | |
| 200 V AC | HP | 1 | |
| 240 V AC | HP | 1.5 | |
| Three-phase | |||
| 200 V AC | HP | 3 | |
| 240 V AC | HP | 3 | |
| 480 V AC | HP | 7.5 | |
| 600 V AC | HP | 7.5 | |
| Short Circuit Current Rating | SCCR | ||
| Basic Rating | kA | 5 | |
| max. Fuse | A | 50 | |
| High fault rating | kA | 10 | |
| max. Fuse | A | 20, Class J | |
| Terminal capacity | |||
| Solid or flexible conductor with ferrule | AWG | 18 – 14 | |
| Terminal screw | M3.5 | ||
| Tightening torque | lb-in | 8.8 | |
| Design verification as per IEC/EN 61439 | |||
| Technical data for design verification | |||
| Rated operational current for specified heat dissipation | In | A | 20 |
| Heat dissipation per pole, current-dependent | Pvid | W | 0.6 |
| Equipment heat dissipation, current-dependent | Pvid | W | 0 |
| Static heat dissipation, non-current-dependent | Pvs | W | 0 |
| Heat dissipation capacity | Pdiss | W | 0 |
| Operating ambient temperature min. | °C | -25 | |
| Operating ambient temperature max. | °C | 50 | |
| IEC/EN 61439 design verification | |||
| 10.2 Strength of materials and parts | |||
| 10.2.2 Corrosion resistance | Meets the product standard’s requirements. | ||
| 10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard’s requirements. | ||
| 10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard’s requirements. | ||
| 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard’s requirements. | ||
| 10.2.4 Resistance to ultra-violet (UV) radiation | UV resistance only in connection with protective shield. | ||
| 10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. | ||
| 10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. | ||
| 10.2.7 Inscriptions | Meets the product standard’s requirements. | ||
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. | ||
| 10.4 Clearances and creepage distances | Meets the product standard’s requirements. | ||
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. | ||
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. | ||
| 10.7 Internal electrical circuits and connections | Is the panel builder’s responsibility. | ||
| 10.8 Connections for external conductors | Is the panel builder’s responsibility. | ||
| 10.9 Insulation properties | |||
| 10.9.2 Power-frequency electric strength | Is the panel builder’s responsibility. | ||
| 10.9.3 Impulse withstand voltage | Is the panel builder’s responsibility. | ||
| 10.9.4 Testing of enclosures made of insulating material | Is the panel builder’s responsibility. | ||
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
| 10.11 Short-circuit rating | Is the panel builder’s responsibility. The specifications for the switchgear must be observed. | ||
| 10.12 Electromagnetic compatibility | Is the panel builder’s responsibility. The specifications for the switchgear must be observed. | ||
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. | ||
| Technical data ETIM 7.0 | |||
| Low-voltage industrial components (EG000017) / Control switch (EC002611) | |||
| Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Control switch (ecl@ss10.0.1-27-37-14-14 [ACN998011]) | |||
| Type of switch | Level switch | ||
| Number of poles | 1 | ||
| Max. rated operation voltage Ue AC | V | 690 | |
| Rated permanent current Iu | A | 20 | |
| Number of switch positions | 4 | ||
| With 0 (off) position | Yes | ||
| With retraction in 0-position | No | ||
| Device construction | Built-in device | ||
| Width in number of modular spacings | 0 | ||
| Suitable for ground mounting | No | ||
| Suitable for front mounting 4-hole | Yes | ||
| Suitable for distribution board installation | No | ||
| Suitable for intermediate mounting | No | ||
| Complete device in housing | No | ||
| Type of control element | Toggle | ||
| Front shield size | 48×48 mm | ||
| Degree of protection (IP), front side | IP65 | ||
| Degree of protection (NEMA), front side | 12 | ||
Değerlendirme yazabilmek için soturum açmalısınız İlgili ürünler
| |||
Değerlendirmeler
Henüz değerlendirme yapılmadı.