EATON 277948 4NA Kontaktör Yardımcı Kontağı

Marka: Eaton
Orijinal fiyat: 16.007,86₺.Şu andaki fiyat: 179,19₺.
10.000₺ ve üzeri alışverişlerinize özel teklif.
Datasheet – DILM150-XHI40
Part no.DILM150-XHI40
Article no.277948
Catalog No.277948
2110PIC-6
Delivery program
AccessoriesAuxiliary contact modules
Descriptionwith interlocked opposing contacts
Functionfor standard applications
Number of poles4 pole
Connection techniqueScrew terminals
Rated operational current
Conventional free air thermal current, 1 pole
Open
at 60 °CIthA16
AC-15
220 V 230 V 240 VIeA6
380 V 400 V 415 VIeA4
Contacts
N/O = Normally open4 N/O
Mounting typeFront fixing
Contact sequence210S170
For use withDILM40…

DILM50…

DILM65…

DILM72…

DILM80…

DILM95…

DILM115…

DILM150…

DILM170…

DILMP63…

DILMP80…

DILMP125…

DILMP160…

DILMP200…

DILMF40…

DILMF50…

DILMF65…

DILMF80…

DILMF95…

DILMF115…

DILMF150…

TypeFront mounting auxiliary contact
InstructionsInterlocked opposing contacts according to IEC/EN 60947-5-1 Appendix L, inside the auxiliary contact module

Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix F (not N/C late open)

Technical data
General
StandardsIEC/EN 60947, VDE 0660, UL, CSA
Component lifespan
at Ue = 230 V, AC-15, 3 AOperationsx 1061.3
Climatic proofingDamp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature
Open°C-25 – +60
Enclosed°C– 25 – 40
Ambient temperature, storage°C– 40 – 80
Mechanical shock resistance (IEC/EN 60068-2-27)
Half-sinusoidal shock, 10 ms
Basic unit with auxiliary contact moduleg
N/O contactg7
N/C contactg5
Degree of ProtectionIP20
Protection against direct contact when actuated from front (EN 50274)Finger and back-of-hand proof
Weightkg0.055
Terminal capacitiesmm2
Screw terminals
Solidmm21 x (0.75 – 2.5)

2 x (0.75 – 2.5)

Flexible with ferrulemm21 x (0.75 – 2.5)

2 x (0.75 – 2.5)

Solid or strandedAWG18 – 14
Pozidriv screwdriverSize2
Standard screwdrivermm0.8 x 5.5

1 x 6

Max. tightening torqueNm1.2
Contacts
Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L)Yes
N/C contact (not late-break contact) suitable as a mirror contact (to IEC/EN 60947-4-1 Annex F)DILM40 – DILM170
Rated impulse withstand voltageUimpV AC6000
Overvoltage category/pollution degreeIII/3
Rated insulation voltageUiV AC690
Rated operational voltageUeV AC500
Safe isolation to EN 61140
between coil and auxiliary contactsV AC440
between the auxiliary contactsV AC440
Rated operational currentA
Conventional free air thermal current, 1 pole
at 60 °CIthA16
AC-15
220 V 230 V 240 VIeA6
380 V 400 V 415 VIeA4
500 VIeA1.5
DC current
Switch-on and switch-off conditions based on DC-13, time constant as specified.
DC L/R ≦ 15 ms
Contacts in series:A
124 VA10
160 VA6
1110 VA3
1220 VA1
Control circuit reliabilityFailure rateλ-8, < one failure at 100 million operations

(at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA)

Short-circuit rating without welding
Short-circuit protection maximum fuse
500 VA gG/gL16
Current heat loss at Ith
AC operatedW3.7
DC operatedW3.7
Current heat loss per auxiliary circuit at Ie (AC-15/230 V)CO0.5
Rating data for approved types
Auxiliary contacts
Pilot Duty
AC operatedA600
DC operatedP300
General Use
ACV600
ACA15
DCV250
DCA1
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipationInA4
Heat dissipation per pole, current-dependentPvidW0.23
Equipment heat dissipation, current-dependentPvidW0
Static heat dissipation, non-current-dependentPvsW0
Heat dissipation capacityPdissW0
Operating ambient temperature min.°C-25
Operating ambient temperature max.°C60
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistanceMeets the product standard’s requirements.
10.2.3.1 Verification of thermal stability of enclosuresMeets the product standard’s requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard’s requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effectsMeets the product standard’s requirements.
10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard’s requirements.
10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.
10.2.7 InscriptionsMeets the product standard’s requirements.
10.3 Degree of protection of ASSEMBLIESDoes not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distancesMeets the product standard’s requirements.
10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connectionsIs the panel builder’s responsibility.
10.8 Connections for external conductorsIs the panel builder’s responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strengthIs the panel builder’s responsibility.
10.9.3 Impulse withstand voltageIs the panel builder’s responsibility.
10.9.4 Testing of enclosures made of insulating materialIs the panel builder’s responsibility.
10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit ratingIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibilityIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block (ecl@ss10.0.1-27-37-13-02 [AKN342013])
Number of contacts as change-over contact0
Number of contacts as normally open contact4
Number of contacts as normally closed contact0
Number of fault-signal switches0
Rated operation current Ie at AC-15, 230 VA6
Type of electric connectionScrew connection
ModelTop mounting
Mounting methodFront fastening
Lamp holderNone
Approvals
Product StandardsIEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking
UL File No.E29184
UL Category Control No.NKCR
CSA File No.012528
CSA Class No.3211-03
North America CertificationUL listed, CSA certified
Specially designed for North AmericaNo
Additional product information (links)
Motor starters and “Special Purpose Ratings” for the North American market
Switchgear of Power Factor Correction Systems
X-Start – Modern Switching Installations Efficiently Fitted and Wired Securely
Mirror Contacts for Highly-Reliable Information Relating to Safety-Related Control Functions
Effect of the Cabel Capacitance of Long Control Cables on the Actuation of Contactors
Switchgear for Luminaires
Standard Compliant and Functionally Safe Engineering Design with Mechanical Auxiliary Contacts
The Interaction of Contactors with PLCs
Busbar Component Adapters for modern Industrial control panels