EATON 266172 Erken Kapama Kontağı

Marka: Eaton
Orijinal fiyat: 90.441,78₺.Şu andaki fiyat: 883,78₺.
10.000₺ ve üzeri alışverişlerinize özel teklif.

EATON 266172 2NA NZM4 – NZM4-XHIV Kompakt Şalter Aksesuarı: Erken Kapama Kontağı

Datasheet – NZM4-XHIV
Part no.NZM4-XHIV
Article no.266172
Catalog No.266172
1230PIC-782
Technical data
Auxiliary contacts
Rated operational voltageUeV
Rated operational voltageUeV AC500
Rated operational voltage, max.UeV DC220
Conventional thermal currentIth = IeCSA4
Rated operational currentIeA
Different rated operational currents when used as auxiliary contact for NZM circuit-breaker
M22-K…M22-CK…XHIV
bei AC = 50/60 Hz
Bemessungsbetriebsstrom
AC-15115 VIeA444
230 VIeA444
400 VIeA22
500 VIeA11
DC-1324 VIeA333
42 VIeA1.711.5
60 VIeA1.20.80.8
110 VIeA0.80.50.5
220 VIeA0.30.20.2
Short-circuit protection
max. fuseA gG/gL10
Max. miniature circuit-breakerAFAZ-B6
Operating times
Early-make time of the HIV compared to the main contacts during with make and break switching.

(switch times with manual operation):

NZM1, PN1, N(S)1: ca. 20 ms

NZM2, PN2, N(S)2: ca. 20 ms

NZM3, PN3, N(S)3: ca. 20 ms

NZM4, N(S)4: approx. 90 ms, the HIV switch early Offswitching not forward.

Terminal capacitiesmm2
Solid or flexible conductor, with ferrulemm21 x (0,75 – 2,5)

2 x (0,75 – 2,5)

AWG1 x (18 – 14)

2 x (18 – 14)

UL/CSA
Rated operational currentIeA2.5 A – 240 V AC

1 A – 250 V DC

Heavy Pilot DutyC300/R300
Other technical data (sheet catalogue)Maximum equipment and position of the internal accessories
Design verification as per IEC/EN 61439
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistanceMeets the product standard’s requirements.
10.2.3.1 Verification of thermal stability of enclosuresMeets the product standard’s requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard’s requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effectsMeets the product standard’s requirements.
10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard’s requirements.
10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.
10.2.7 InscriptionsMeets the product standard’s requirements.
10.3 Degree of protection of ASSEMBLIESDoes not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distancesMeets the product standard’s requirements.
10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connectionsIs the panel builder’s responsibility.
10.8 Connections for external conductorsIs the panel builder’s responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strengthIs the panel builder’s responsibility.
10.9.3 Impulse withstand voltageIs the panel builder’s responsibility.
10.9.4 Testing of enclosures made of insulating materialIs the panel builder’s responsibility.
10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit ratingIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibilityIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block (ecl@ss10.0.1-27-37-13-02 [AKN342013])
Number of contacts as change-over contact0
Number of contacts as normally open contact2
Number of contacts as normally closed contact0
Number of fault-signal switches0
Rated operation current Ie at AC-15, 230 VA4
Type of electric connectionScrew connection
ModelIntegrable
Mounting methodOther
Lamp holderNone
Approvals
Product StandardsUL489; CSA-C22.2 No. 5-09; IEC60947, CE marking
UL File No.E140305
UL Category Control No.DIHS
CSA File No.022086
CSA Class No.1437-01
North America CertificationUL listed, CSA certified
Additional product information (links)
Maximum equipment and position of the internal accessories
Time differences ON-OFF

EATON NE İŞ YAPAR ?

Bugün dünyamız kritik altyapı ve teknoloji üzerinde dönüyor. Uçaklar… Hastaneler… Fabrikalar… Veri merkezleri… Araçlar… Elektrik şebekesi… Günümüzde insanların her gün ihtiyaç duyduğu şeyler vardır. Ve şirketler de gezegenimizdeki en büyük güç zorluklarından bazılarının üstesinden gelmelerine yardımcı olmamız için bize güvenmektedir. Eaton’da, daha güvenilir, daha verimli ve daha emniyetli güç yönetimi teknolojileriyle insanların hayatını ve çevreyi iyileştirmeye kendimizi adamış bulunuyoruz.

Biz, 99,000’den fazla çalışana sahip ve 175’ten fazla ülkede iş yapan bir güç yönetim şirketiyiz. Enerji verimli ürün ve hizmetlerimiz müşterilerimizin elektrik gücünün yanı sıra, hidrolik ve mekanik gücü daha güvenilir, verimli, emniyetli ve sürdürülebilir şekilde yönetmelerine yardımcı olmaktadır. Bunları da, insanlara gücü daha verimli kullanabilecekleri araçlar temin ederek, şirketlerin daha sürdürülebilir şekilde iş yapmalarına yardım ederek ve Eaton’daki her çalışanımızı işimiz, toplumlarımız ve dünya üzerinde bırakabileceğimiz etki hakkında farklı düşünmeye teşvik ederek başarıyoruz.