EATON 260135 Şalter Kurma Kolu

Marka: Eaton
Orijinal fiyat: 63.802,14₺.Şu andaki fiyat: 623,17₺.
10.000₺ ve üzeri alışverişlerinize özel teklif.

EATON 260135 NZM1 – NZM1-XDVR Kompakt Şalter Aksesuarı: Döner Kurma Kolu-Kırmızı

Datasheet – NZM1-XDVR
Part no.NZM1-XDVR
Article no.260135
Catalog No.260135
1230PIC-762
Delivery program
Product rangeAccessories
AccessoriesRotary handle on circuit-breaker
Standard/ApprovalUL/CSA, IEC
Construction sizeNZM1
DescriptionMakes it possible to operate the switch with a rotational movement and provides locking facilities
FunctionRed-yellow for emergency switching off
Protection classIP20
Locking facilitylockable on the 0 position on the switch using up to 3 padlocks
Project planning informationComplete with rotary drive

Can be combined with insulating surround

MODAN handle position detection by wire release can be retrofitted

ActuationRotary handle
For use withNZM1(-4), PN1(-4), N(S)1(-4)
Notes

Circuit‐breaker can also be installed in a lying position 90 ° left/right, with the handle still in the same position.

Technical data
Design verification as per IEC/EN 61439
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistanceMeets the product standard’s requirements.
10.2.3.1 Verification of thermal stability of enclosuresMeets the product standard’s requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard’s requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effectsMeets the product standard’s requirements.
10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard’s requirements.
10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.
10.2.7 InscriptionsMeets the product standard’s requirements.
10.3 Degree of protection of ASSEMBLIESDoes not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distancesMeets the product standard’s requirements.
10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connectionsIs the panel builder’s responsibility.
10.8 Connections for external conductorsIs the panel builder’s responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strengthIs the panel builder’s responsibility.
10.9.3 Impulse withstand voltageIs the panel builder’s responsibility.
10.9.4 Testing of enclosures made of insulating materialIs the panel builder’s responsibility.
10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit ratingIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibilityIs the panel builder’s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Handle for power circuit breaker (EC000229)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Handle for switch devices (ecl@ss10.0.1-27-37-04-14 [AKF012014])
LockableYes
ColourRed
Suitable for emergency stopYes
With extension shaftNo
Suitable for power circuit breakerYes
Suitable for switch disconnectorYes
Approvals
Product StandardsUL489; CSA-C22.2 No. 5-09; IEC60947, CE marking
UL File No.E140305
UL Category Control No.DIHS
CSA File No.022086
CSA Class No.1437-01
North America CertificationUL listed, CSA certified
Degree of ProtectionIEC: IP20
Dimensions
123X296
123X196